Dell PowerConnect 5324 Command Line Interface Guide - Page 179
LLDP Commands, lldp enable (global), Syntax, lldp enable (interface)
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
LLDP Commands lldp enable (global) To enable Link Layer Discovery Protocol (LLDP), use the lldp enable command in global configuration mode. To disable LLDP, use the no form of this command. Syntax lldp enable no lldp enable Default Configuration The command is enabled. Command Mode Global configuration User Guidlines • There are no guidelines for this command. Example The following example enables Link Layer Discovery Protocol (LLDP) . console (config)# lldp enable lldp enable (interface) To enable Link Layer Discovery Protocol (LLDP) on an interface, use the lldp enable command in interface configuration mode. To disable LLDP on an interface, use the no form of this command. Syntax lldp enable [rx | tx | both] no lldp enable • rx - Receive only LLDP packets. • tx -Transmit only LLDP packets. • both - Receive and transmit LLDP packets (default) Default Configuration Enabled in both modes. LLDP Commands 179