Dell PowerConnect 5324 Command Line Interface Guide - Page 346
switchport general ingress-filtering disable, interface ethernet, switchport general pvid
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
www.dell.com | support.dell.com Command Mode Interface configuration (Ethernet, port-channel) mode User Guidelines • This command has the following consequences: incoming untagged frames are assigned to this VLAN and outgoing traffic in this VLAN on this port is sent untagged (despite the normal situation where traffic sent from a trunk-mode port is all tagged). Example The following example shows how to configure the PVID for g8, when the interface is in general mode. Console (config)# interface ethernet g8 Console (config-if)# switchport general pvid 234 switchport general ingress-filtering disable The switchport general ingress-filtering disable Interface Configuration mode command disables port ingress filtering. To enable ingress filtering on a port, use the no form of this command. Syntax switchport general ingress-filtering disable no switchport general ingress-filtering disable Default Configuration Ingress filtering is enabled. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines • There are no user guidelines for this command. Example The following example shows how to enables port ingress filtering on g8. Console (config)# interface ethernet g8 Console (config-if)# switchport general ingress-filtering disable 346 VLAN Commands