Dell PowerConnect 5324 Command Line Interface Guide - Page 161
arp - 24 port
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Console# show ip interface Gateway IP Address 10.7.1.1 Type ----------Static Activity Status Active IP address 10.7.1.192/24 10.7.2.192/24 Interface -----------VLAN 1 VLAN 2 Type -----------Static DHCP arp The arp Global Configuration mode command adds a permanent entry in the Address Resolution Protocol (ARP) cache. To remove an entry from the ARP cache, use the no form of this command. Syntax arp ip_addr hw_addr {ethernet interface-number | vlan vlan-id | port-channel number} no arp ip_addr {ethernet interface-number | vlan vlan-id | port-channel number} • ip_addr-IP address or IP alias to map to the specified MAC address. • hw_addr-MAC address to map to the specified IP address or IP alias. • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • The software uses ARP cache entries to translate 32-bit IP addresses into 48-bit hardware addresses. Because most hosts support dynamic resolution, static ARP cache entries do not need to be specified. IP Addressing Commands 161