Dell PowerConnect 5324 Command Line Interface Guide - Page 323
show system, show sessions
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Default Configuration There is no default configuration for this command. Command Mode EXEC mode User Guidelines 1 Open telnet session from PC 5324 to other device. 2 In the other device syntax, press Cntrl-shift-t-X 3 Enter the command show session. The number of sessions opened from PC 5324 is displayed. 4 Enter the command resume [number of session] to return to the relevant telnet session. Examples The following table describes the significant fields shown in the display: Console> show sessions Connecti on -------1 2 Host Address Remote device 172.16.1.1 172.16.1.2 172.16.1.2 Port ----23 23 Byte ---89 8 Field Connection Host Address Port Byte Description Connection number Remote host to which the device is connected through a Telnet session. IP address of the remote host. Telnet TCP port number Number of unread bytes for the user to see on the connection. show system The show system User EXEC mode command displays system information. Syntax show system System Management 323