Dell PowerConnect 5324 Command Line Interface Guide - Page 265
spanning-tree priority, spanning-tree disable
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Example The following example configures the spanning-tree bridge maximum-age to 10 seconds. Console(config)# spanning-tree max-age 10 spanning-tree priority The spanning-tree priority Global Configuration mode command configures the spanning-tree priority. The priority value is used to determine which bridge is elected as the root bridge. To reset the default spanning-tree priority use the no form of this command. Syntax spanning-tree priority priority no spanning-tree priority • priority-Priority of the bridge. (Range: 0 - 65535 in steps of 4096) Default Configuration The default bridge priority for IEEE STP is 32768. Command Modes Global Configuration mode User Guidelines • The priority value must be a multiple of 4096. • The bridge with the lowest priority is elected to be the Root Bridge. Example The following example configures spanning-tree priority to 12288. Console(config)# spanning-tree priority 12288 spanning-tree disable The spanning-tree disable Interface Configuration mode command disables spanning-tree on a specific port. To enable spanning-tree on a port use, the no form of this command. Syntax spanning-tree disable no spanning-tree disable Default Configuration By default, all ports are enabled for spanning-tree. Spanning-Tree Commands 265