Dell PowerConnect 5324 Command Line Interface Guide - Page 192

www.dell.com | support.dell.com • service service-Indicates service type. Can be one of the following: telnet, ssh, http, https or snmp. Default Configuration This command has no default configuration. Command Mode Management Access-list Configuration mode User Guidelines • Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is defined on the appropriate interface.The system supports up to 256 management access rules. Example The following example shows how all ports are denied in the access-list called "mlist". Console (config)# management access-list mlist Console (config-macl)# deny management access-class The management access-class Global Configuration mode command defines which management access-list is used. To disable restriction, use the no form of this command. Syntax management access-class {console-only | name} no management access-class • name-Name of the access list. If unspecified, defaults to an empty access-list.(Range: 1 32 characters) • console-only-The device can be managed only from the console. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. 192 Management ACL