Dell PowerConnect 5324 Command Line Interface Guide - Page 151
ip igmp snooping mrouter-time-out, interface vlan
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Syntax ip igmp snooping host-time-out time-out no ip igmp snooping host-time-out • time-out-Host timeout in seconds. (Range: 1 - 2147483647) Default Configuration The default host-time-out is 260 seconds. Command Mode Interface Configuration (VLAN) mode User Guidelines • The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router. Example The following example configures the host timeout to 300 seconds. Console (config)# interface vlan 2 Console (config-if)# ip igmp snooping host-time-out 300 ip igmp snooping mrouter-time-out The ip igmp snooping mrouter-time-out Interface Configuration mode command configures the mrouter-time-out. The mrouter-time-out command is used for setting the aging-out time after multicast router ports are automatically learned. To configure the default mrouter-time-out, use the no form of this command. Syntax ip igmp snooping mrouter-time-out time-out no ip igmp snooping mrouter-time-out • time-out-mrouter timeout in seconds (Range: 1 - 2147483647) Default Configuration The default value is 300 seconds. Command Mode Interface Configuration (VLAN) mode IGMP Snooping Commands 151