Dell PowerConnect 5324 Command Line Interface Guide - Page 349
switchport general map protocols-group vlan, ip internal-usage-vlan
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
switchport general map protocols-group vlan The switchport general map protocols-group vlan Interface Configuration mode command sets a protocol-based classification rule. To delete a classification, use the no form of this command. Syntax switchport general map protocols-group group vlan vlan-id no switchport general map protocols-group group • group-Group number as defined in the map protocol protocols-group command. (Range: 1 - 2147483647) • vlan-id-Define the VLAN ID in the classifying rule. Default Configuration This command has no default configuration. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines • There are no user guidelines for this command. Example The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8. Console (config)# interface ethernet g8 Console (config-if)# switchport general map protocols-group 1 vlan 8 ip internal-usage-vlan The ip internal-usage-vlan Interface Configuration mode command reserves a VLAN as the internal usage VLAN of an interface. Use the no form of this command to reset to default. Syntax ip internal-usage-vlan vlan-id no ip internal-usage-vlan • vlan-id-VLAN ID of the internal usage VLAN.(Range: Valid VLAN) Default Configuration This command has no default configuration. VLAN Commands 349