Brother International HL 1850 Service Manual - Page 107
DISASSEMBLY, ASSEMBLY, Paper, pick-up, roller, Grease, Molykote, grain, cassette, cover,
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY NOTE; When replacing/re-assembling the padholder ZLh ASSY, remove the oldgrease and apply a suitable amount of grease referring to the figure below; Paper pick-up roller Grease: Molykote PG-662 / (1 rice-grain size) Paper cassette , \\\ \\\\ \\\ \ Fig. 4-5 (3) Turn the paper cassette upside down, then remove the tray cover film by peeling it carefully from the underside of the cassette. (4) Remove the TORX pan B M3x8 Taptite screw and remove the paper tray cover from the front of the cassette. Tray cover film Taptite, TORX pan B M3x8 t ?.---\'' ,-2--- _, , , r „------d rI --aez---- Paper cassette Paper tray cover Fig. 4-6 NOTE; • The cover film must not be reused after it has been removed. Always replace it with a new one. • The screw securing the paper cassette cover indicated RED in the figure above is very special. When disassembling/re-assembling the screw, you need a special screw driver. Refer to the parts reference list. 4-6