Brother International HL 1850 Service Manual - Page 223
Unable, print, s, document, PRINT, OVERRUN, message., MEMORY
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
HL-1850/1870N SERVICE MANUAL P-2 Unable to print full pages of a document with the "PRINT OVERRUN" message. rA User Check (1) Press the Go switch on the control panel to print the data remaining in the printer. (2) If this does not clear the error, reduce the complexity of your document or reduce the printer resolution. (3) Expand the printer memory by adding a commercially available DIMM. (4) Change the following setting in the printer driver and try again. The best combination of settings below will vary depending on your document. Graphic Mode / TrueTypeTM mode / Use Printer TrueTypeTm Fonts. NOTE: This problem may appear if the data is too complex. If it is not cleared by taking the actions above, it will be impossible to print such data under the printer specifications. P-3 Unable to print full pages of a document with the "MEMORY FULL" message. rihA User Check (1) Press the Go switch on the control panel to print the data remaining in the printer. (2) Reduce the complexity of your document or reduce the printer resolution. (3) Expand the printer memory by adding a commercially available DIMM. NOTE: This problem may appear if the data is too complex. Possible cause Unable to recognize DIMM DIMM / main PCB failure Step 1 Check Check the memory size in Print Configuration. Is it the default size? 2 Try installing DIMM into another printer, then check the memory size in Print Configuration. Is it possible to print the data? Result Yes Yes No Remedy Expand the memory size by adding DIMM. If the memory is already at the maximum size, it will be impossible to print the data under the printer specifications. Replace the DIMM. Replace the main PCB. 6-57