Brother International HL 1850 Service Manual - Page 240

HL-1850/1870N SERVICE MANUAL Title & Subtitle FONT SELECT 300DPI PRIORITY Item to be Set 3B PRIO=LOW* 3B PRIO=HIGH FX/XL SCALE FONT SCAL.F=NORMAL* FX/XL SCALE ITA. SCAL.F=ALL SIZE ITA=OBLIQUE* exit FONT PAPER&TRAY SIZE ITA=ITALIC SEL DEF PAPER=LT* DEF PAPER=A4 PARALLEL MENU PARALLEL TIMING CDCC PSW=H* CDDC PSW=L STB/ACK DELAY CDCC BSSL=L* exit PARALLEL REPRINT ON/OFF CDCC BSSL=H REPRINT=ON* REPRINT=OFF Description The priority of selection for 300dpi bitmap fonts are standard (=low). The priority of selection for 300dpi bitmap fonts are higher than scalable font. The compatibility of font selection manner with HP LaserJet 4 is not maintained if you choose 3B PRIO=HIGH. Only similar size fonts are selectable as scalable is selected. All fonts are selectable. Makes upright font oblique to have italic as scalable font is selected. Uses the italic font to have italic as scalable font is selected. Printers to be shipped to USA and Canada have the Letter size setting by default. Printers to be shipped to the other area than USA and Canada have the A4 size setting by default. BUSY signal gets high when STROBE signal goes up. This is chosen by default. BUSY signal gets high when STROBE signal goes down (low). ACK signal is sent out before BUSY signal goes down. This is chosen by default. ACK signal is sent out when BUSY signal goes down. Follows the user menu's setting which selects either enabling or disabling reprint function. Enables reprint function.