Brother International HL 1850 Service Manual - Page 49

CHAPTER 2 INSTALLATIONAND BASIC OPERATION (3) Open the Property tab in the printer driver. Select the duplex printing mode in the Paper tab, and then click the OK button. The printer will print on both sides of the paper automatically. 4.5 Manual Feed If paper is placed in the multi-purpose tray when the setting MANUAL FEED = ON has been set in PAPER mode using the control panel, the printer will load paper only form the multipurpose tray. NOTE: Note the following when feeding paper manually: • If the application software supports a manual feed selection in the print menu, it can be selectedin that software. The software command setting overrides the controlpanel's setting. It will not be necessary to set MANUAL FEED in PAPER mode. • Ifpre-printedpaper is usedin the multi-purpose tray, the paper should be inserted top edge first with the pre-printed side face up. 4.6 Printing side of duplex printing Since the standard delivery tray is a face down tray, when duplex printing is carried out, an even-numbered paper is printed first, then the odd numbered page, so that the page order in the output tray is correct. If single side printing is done in normal mode, paper is drawn from an input tray, and it naturally prints and discharges a face down page. If single side printing of 1-page of data is done in duplex mode, printing is done by feeding paper from an input tray, passing it through the duplex unit and then printing the first side. 2-20