Brother International HL 1850 Service Manual - Page 108

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (5) Keeping the paper cassette upside down, release the pressure roller holder assembly from the cassette by releasing the metal mounting plate from the plastic retaining boss. Use a flat screwdriver to press the metal plate forwards until it clears the boss and then remove the pressure roller holder assembly downwards from the cassette. (6) Remove the cassette pressure roller from the assembly, then remove the pressure roller shaft from the pressure roller collar. (7) Remove the sponge holder ASSY from the holder. The two sponge holder springs will also come off. Sponge holder ASSY Pressure roller shaft Pressure roller collar Sponge holder springs Pressure roller holder Paper cassette Flat screwdriver Pressure roller holder Fig. 4-7 (8) Keeping the paper cassette upside down, remove the two cup B M2.6x5 Taptite screws. (9) Unhook the catches of each side guide, then press the lock lever towards the front of the cassette to release the pressure plate. Step (9) Side guide L Taptite, cup B M2.6x5 Side guide rack Taptite, cup B M2.6 ti (catches) Paper cassette (Back side) (CO Fig. 4-8 Lock lever Side guide L Side guide rack