Brother International HL 1850 Service Manual - Page 152
Motor
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY 3.17 Main PCB ASSY (1) Remove the two pan M3x6 screws and the six cup S tite 3x6 screws from the main PCB ASSY. (2) Disconnect the four connectors for the low-voltage power supply, engine PCB, the panel PCB and the scanner unit. (3) Remove the main PCB ASSY from the frame. Main PCB ASSY Screw, pan M3x6 1 Main frame Fig. 4-83 Screw, cup S tite M3x6 Screw, cup S tite M3x6 3.18 Fan Motor / Fan Motor 60 NOTE: Be sure to disconnect the fan motor connector on the fan relay PCB before removing the fan motor and fan motor 60. (1) Release the two hooks and remove the fan motor from the fan duct by pulling slightly forward. (2) Remove the fan motor 60 from the main frame by pulling upward. Fan motor NOTE: (hook) Fan du 11 (hook) Fan motor 60 Fig. 4-84 4-54