Brother International HL 1850 Service Manual - Page 51

CHAPTER 2 INSTALLATIONAND BASIC OPERATION 5.2 Panel Switches Functions You can control the basic printer operations and change various printer settings with 7 control panel switches (Go, Job Cancel, Reprint, +, -, Set, Back). Key Go Job Cancel Reprint + Set Back Function Exit from the control panel menu. Reprint settings and Error messages. Pause / Continue printing. Stop and cancel the printer operation in progress. Select the reprint menu. (1-999) Move forward and backward through menus. Move forward and backward through selectable options. Select the control panel menu. Set the selected menus and settings. Go back one level in the menu structure. 5.2.1 Go switch The panel indications can be changed from the current status (MENU, ERROR and REPRINT settings) by pressing the Go switch once. For ERROR indications, the panel changes only when the error is cleared. You can PAUSE printing with the Go switch. Pressing the Go switch again restarts the print job and clears the PAUSE. During PAUSE, the printer is in the off-line state. NOTE: If you do not wish to print the remaining data when the printer is in PAUSE, you can cancel the job by pressing Job Cancel switch. Press the Go switch to clear the PAUSE and return the printer to the "Ready" state. 5.2.2 Job Cancel switch You can cancel the processing or printing of data with the Job Cancel switch. When the printer is still receiving data or the printer is in an error state, the display shows "NO DATA ! ! !" and you cannot cancel the job. The display shows "JOB CANCELLIG" until canceling is completed. After canceling the job, the printer returns to the "READY" state. 2-22