Brother International HL 1850 Service Manual - Page 120

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (7) Remove the bind B M3x8 Taptite screw from the guide plate stopper and remove the left guide spring 2. (8) Remove the side regist guide from the DX feed ASSY by releasing the hook at the bottom side of the ASSY using a pair of long nose pliers. NOTE: "ERROR 41" may occur if the left guide springs are not fitted correctly. See subsection 2.2 `Service Calls' in CHAPTER 6 for more information on "ERROR 41". Taptite, bind B M3x8 Guide plate stopper (hook) DX feed ASSY (Back side) Left guide springs 2 2 / ....., 6 0 , l e' r f 1- el -------- DX feed ASSY ) 4' Side regist guide Fig. 4-30 (9) Remove the left guide plate from the DX feed ASSY while pushing down the DX paper actuator forward and then release the Drive gear 14 to remove the DX feed roller ASSY. DX feed roller ASSY Drive gear 14 DX paper actuator i DX feed ASSY r_ i-. Left guide plate