Brother International HL 1850 Service Manual - Page 276
Appendix, Rewrite, 1850/1870n, Flash
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
APPENDIX APPENDIX 22. HOW TO REWRITE HL-1850/1870N FLASH ROM Working contents 1) Rewrite a Main firmware. 2) Rewrite a Network firmware. 3) Rewrite a Patch Area of Main Mask ROM (=embedded Flash ROM). 4) Set up by country. Object parts LH8944001 MAIN PCB ASSY 1850/1870N Preparation tool 1) PC (Windows`] 95/98) 2) 1 HL-1850/1870N printer 3) 1 CDCC cable 4) ZLHEFWRT.EXE(software) Time required for rewriting work 1) Main firmware .. . app.7 min. 2) Network firmware .. . app. 2 min. NOTE; Working hours change according to the capability of PC to be used. Rewriting procedure 1) Prepare the Windows° 95 or 98. When rewriting work has been done before, be sure to delete all files which developed at that time. Create the folder "ZLhe" in C drive, and save the "ZLHEFWRT.EXE" in it. Run "ZLHEFWRT.EXE". The window which checks execution comes out, then click OK. A required file is developed in the folder "ZLhe". 2) Choose Start.. .>Program.. .>MS-DOS Since the DOS window is opened, move the BLF folder under the ZLhe folder by CD command. ( How to input the command ; CD CAZLhelPITIBLF + ENTER ) 3) Connect the CDCC cable to the printer, then turn the printer power switch ON. Wait until the printer LCD display turn green and "READY" message appears. 4) Input "fls-prg verXXX.ava" in DOS window, then press ENTER. ( XXX expresses a version. Check by the DIR command.) Data is sended by parallel cable, then rewriting starts. 5) After finishing rewriting, the system wil l be rebooted. Wait until "READY" message appears on the LCD display of printer. 6) Move to the "ZLhe" folder by CD command in DOS window. ( How to input the command ; CD CAZLhe + ENTER ) 7) Input "PIT2" in DOS window, then press ENTER. PIT2 (software tool)will be started. 8) Input "/CS1850" in PIT2 control window, then press ENTER. "CS1850 (SCRPTY.YY)" message appears in the model section of PIT2 control window. A-30