Epson PowerLite 1825 User's Guide - Page 19
Using the Direct Power On Function, warning
View all Epson PowerLite 1825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Press the PPower button on the remote control or on top of the projector. The projector beeps once and the Power light flashes green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the projector is ready for use. 4. If you are prompted to enter a password, see page 146. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. Using the Direct Power On Function The Direct Power On function enables faster setup. The projector starts up automatically when you plug it in or turn it on with a wall switch. You don't have to press the PPower button. Follow these steps to enable Direct Power On: 1. Press the Menu button on the remote control or projector and select the Extended menu. 2. Choose Operation and press Enter. 3. Choose Direct Power On and press Enter. 4. Highlight ON and press Enter. 5. Press Menu to exit. The setting will take effect the next time you plug in the projector. note If a power outage occurs when Direct Power On is enabled and the projector is plugged in, the projector will restart when the power is restored. Displaying and Adjusting the Image 19