HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 10

Default The description of an interface is the interface name plus Interface (for example, Ten-GigabitEthernet1/1/5 Interface). Views Ethernet interface view Predefined user roles network-admin Parameters text: Specifies the interface description, a case-sensitive string of 1 to 80 characters. Usage guidelines When you use a network management system (for example, IMC) to manage devices, to guarantee the normal operation of the network management system, make sure the text argument is of no more than 64 characters. Examples # Change the description of interface Ten-GigabitEthernet 1/1/5 to lanswitch-interface. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] description lanswitch-interface display counters Use display counters to display interface traffic statistics. Syntax display counters { inbound | outbound } interface [ interface-type [ interface-number ] ] Views Any view Predefined user roles network-admin network-operator Parameters inbound: Displays inbound traffic statistics. outbound: Displays outbound traffic statistics. interface-type: Specifies an interface type. interface-number: Specifies an interface number. Usage guidelines This command displays traffic statistics within a statistics polling interval specified by the flow-interval command. To clear the Ethernet interface traffic statistics, use the reset counters interface command. For more information, see "reset counters interface." 3