HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 94

link-aggregation selected-port minimum Use link-aggregation selected-port minimum to configure the minimum number of Selected ports in the aggregation group. Use undo link-aggregation selected-port minimum to restore the default setting. Syntax link-aggregation selected-port minimum number undo link-aggregation selected-port minimum Default The minimum number of Selected ports in an aggregation group is not specified. Views Aggregate interface view Predefined user roles network-admin Parameters number: Specifies the minimum number of Selected ports in an aggregation group required to bring up the aggregate interface. The value range for this argument is 1 to 16. Usage guidelines Executing this command might cause all the member ports in the aggregation group to become unselected. The minimum number of Selected ports allowed in the aggregation groups of the local and peer ends must be consistent. Examples # Configure the minimum number of Selected ports as 3 in the aggregation group that corresponds to aggregate interface Bridge-Aggregation 1. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3 Related commands link-aggregation selected-port maximum port link-aggregation group Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group. Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to which it belongs. Syntax port link-aggregation group number undo port link-aggregation group 87