HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 23

Field Unit CtrlMode Status Trap Log SwitchNum Description Storm control threshold unit: • pps. • kbps. • percentage. Protective action (block or shutdown) taken on the port when the upper threshold is reached. N/A indicates that no protective action is configured. Packet forwarding status: • forwarding-The port is forwarding traffic correctly. • shutdown-The port has been shut down. • block-The port drops the type of traffic. Status of the storm control threshold event trap switch: • on-The port sends threshold event traps. • off-The port does not send threshold event traps. Status of the storm control threshold event log switch: • on-The port sends threshold event log messages. • off-The port does not send threshold event log messages. Number of forwarding state changes of the interface. When the SwitchNum count reaches 65535, it resets automatically. duplex Use duplex to set the duplex mode for an Ethernet interface. Use undo duplex to restore the default duplex mode of the Ethernet interface. Syntax duplex { auto | full } undo duplex Default The downlink 10-GE interfaces operate in full duplex mode, and all other types of Ethernet interfaces operate in autonegotiation mode. Views Ethernet interface view Predefined user roles network-admin Parameters auto: Configures the interface to autonegotiate the duplex mode with the peer. full: Configures the interface to operate in full duplex mode, so that the interface can receive and transmit packets at the same time. Usage guidelines Downlink 10-GE interfaces support only the full keyword of the command. 16