HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 140

Syntax stp tc-restriction undo stp tc-restriction Default TC-BPDU transmission restriction is disabled. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Usage guidelines When TC-BPDU transmission restriction is enabled on a port, the port does not send TC-BPDUs to the other ports, and it does not delete the MAC address entries. When the setting is configured in Ethernet interface view, it takes effect on only that interface. When the setting is configured in aggregate interface view, it takes effect on only the aggregate interface. When the setting is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group. Examples # Enable TC-BPDU transmission restriction on FortyGigE 1/1/1. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] stp tc-restriction stp timer forward-delay Use stp timer forward-delay to set the forward delay timer of the device. Use undo stp timer forward-delay to restore the default. Syntax stp timer forward-delay time undo stp timer forward-delay Default The forward delay timer is 1500 centiseconds. Views System view Predefined user roles network-admin Parameters time: Sets the forward delay in centiseconds, in the range of 400 to 3000 in increments of 100 (as in 400, 500, 600). 133