HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 85
interface bridge-aggregation
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Field System ID Local Remote Description Local system ID, comprising the system LACP priority and the system MAC address. Information about the local end: • Port-Port type and number. • Status-Selected or Unselected state of the port. • Priority-Port priority. • Oper-Key-Operational key. • Flag-LACP state flag. NOTE: For static aggregation groups, only local information (without the Flag field) is displayed. Information about the remote end: • Actor-Port type and number of the local end. • Partner-Port index of the remote end. • Priority-Port priority of the remote end. • Oper-Key-Operational key of the remote port. • System ID-System ID of the remote end. • Flag-LACP state flag of the remote end. interface bridge-aggregation Use interface bridge-aggregation to create an aggregate interface and enter the aggregate interface view. Use undo interface bridge-aggregation to remove an aggregate interface. Syntax interface bridge-aggregation interface-number undo interface bridge-aggregation interface-number Default No aggregate interface is created. Views System view Predefined user roles network-admin Parameters interface-number: Specifies an aggregate interface number in the range of 1 to 1024. Usage guidelines When you create an aggregate interface, the system automatically creates an aggregation group with the same number, which operates in static aggregation mode by default. If you remove the aggregate interface, you also remove the aggregation group, and any member ports leave the aggregation group. 78