HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 114
display stp root, Related commands, Syntax, Views, Predefined user roles, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Table 27 Command output Field Format selector Region name Revision level VLANs Mapped Description Format selector that is defined by the spanning tree protocol. The default value is 0, and the selector cannot be configured. MST region name. Revision level of the MST region. The default value is 0, and the level can be configured by using the revision-level command. VLANs mapped to the MSTI. Related commands • instance • region-name • revision-level • vlan-mapping modulo display stp root Use display stp root to display the root bridge information of all MSTIs. Syntax display stp root Views Any view Predefined user roles network-admin network-operator Examples # In MSTP mode, display the root bridge information of all spanning trees. display stp root MSTID Root Bridge ID ExtPathCost IntPathCost Root Port 0 0.00e0-fc0e-6554 200200 0 FortyGigE1/1/1 Table 28 Command output Field ExtPathCost IntPathCost Root Port Description External path cost. The device automatically calculates the default path cost of a port. Or, you can use the stp cost command to configure the path cost of a port. Internal path cost. The device automatically calculates the default path cost of a port. Or, you can use the stp cost command to configure the path cost of a port. Root port name (displayed only if a port of the device is the root port of MSTIs). 107