HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 174
Parameters, Examples, vlan-list, start-vlan-id, end-vlan-id
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Parameters vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN ID or a range of VLAN IDs in the start-vlan-id to end-vlan-id form. The value range for VLAN IDs are 1 to 4094. Make sure the VLANs have been created. all: Specifies all VLANs that have been created. Examples # Configure FortyGigE 1/1/1 as a trunk port, and assign the port to VLAN 2, VLAN 3, and VLANs 50 through 100. Enable QinQ on FortyGigE 1/1/1, and configure the port to transparently transmit frames from VLAN 2. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] port link-type trunk [Sysname-FortyGigE1/1/1] port trunk permit vlan 2 3 50 to 100 [Sysname-FortyGigE1/1/1] qinq enable [Sysname-FortyGigE1/1/1] qinq transparent-vlan 2 167