HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 83

Syntax display link-aggregation verbose [ bridge-aggregation [ interface-number ] ] Views Any view Predefined user roles network-admin network-operator Parameters bridge-aggregation: Displays detailed information about the aggregation groups that correspond to aggregate interfaces. interface-number: Specifies an existing aggregate interface number. Usage guidelines To display information about a specific aggregation group, use the display link-aggregation verbose bridge-aggregation interface-number command. To display information about all aggregation groups, use the display link-aggregation verbose bridge-aggregation command. To display information about all aggregation groups, use the display link-aggregation verbose command. The bridge-aggregation keyword is available only after you create aggregate interfaces on the device. Examples # Display detailed information about the aggregation group that corresponds to aggregate interface Bridge-Aggregation 10, which is a dynamic aggregation group. display link-aggregation verbose bridge-aggregation 10 Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Port Status: S -- Selected, U -- Unselected Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, D -- Synchronization, E -- Collecting, F -- Distributing, G -- Defaulted, H -- Expired Aggregate Interface: Bridge-Aggregation10 Aggregation Mode: Dynamic Loadsharing Type: Shar System ID: 0x8000, 000f-e267-6c6a Local: Port Status Priority Oper-Key Flag XGE1/1/5 S 32768 2 {ACDEF} XGE1/1/6 S 32768 2 {ACDEF} Remote: Actor Partner Priority Oper-Key SystemID Flag XGE1/1/5 32 32768 2 0x8000, 000f-e267-57ad {ACDEF} XGE1/1/6 26 32768 2 0x8000, 000f-e267-57ad {ACDEF} 76