HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 158
name
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Examples # Set the MTU to 1492 bytes for VLAN-interface 1. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] mtu 1492 Related commands display interface vlan-interface name Use name to configure a name for the VLAN. Use undo name to restore the default name of the VLAN. Syntax name text undo name Default Views The name of a VLAN is VLAN vlan-id, which specifies the ID of the VLAN. For example, the name of VLAN 100 is VLAN 0100. VLAN view Predefined user roles network-admin Parameters text: Specifies a VLAN name, a string of 1 to 32 characters. The string can include case-sensitive letters, digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace ({), right brace (}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/), spaces, and other Unicode characters and symbols. Usage guidelines You can use VLAN names, rather than VLAN IDs, to distinguish a large number of VLANs. Examples # Configure the name of VLAN 2 as test vlan. system-view [Sysname] vlan 2 [Sysname-vlan2] name test vlan Related commands display vlan 151