HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 41

using tengige Use using tengige to split a 40-GE interface into four 10-GE interfaces. Use undo using tengige to cancel the configuration. Syntax using tengige undo using tengige Default A 40-GE interface is used as a single interface, and it will not be automatically split. Views 40-GE interface view Predefined user roles network-admin Usage guidelines To improve port density, reduce costs, and improve network flexibility, you can split a 40-GE interface into four 10-GE interfaces. For example, you can split a 40-GE interface FortyGigE 1/1/1 into four 10-GE interfaces Ten-GigabitEthernet 1/1/1:1 through Ten-GigabitEthernet 1/1/1:4. The 10-GE interfaces that are split from a 40-GE interface support the same configuration and attributes as common 10-GE interfaces, except that they are numbered differently. After the configuration, the system prompts you to reboot your device. You must reboot the device to see the four 10-GE interfaces. Examples # Split 40-GE interface FortyGigE 1/1/1 into four 10-GE interfaces. system-view [System] interface fortygige 1/1/1 [System-FortyGigE1/1/1] using tengige The interface FortyGigE1/1/1 will be deleted. Continue? [Y/N]:y Reboot device to make the configuration take effect. Related commands using fortygige 34