HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 165
port hybrid vlan
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
[Sysname] vlan 100 [Sysname-vlan100] quit [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] port link-type hybrid [Sysname-FortyGigE1/1/1] port hybrid pvid vlan 100 [Sysname-FortyGigE1/1/1] port hybrid vlan 100 untagged Related commands • port hybrid vlan • port link-type port hybrid vlan Use port hybrid vlan to assign the hybrid ports to the specified VLANs. Use undo port hybrid vlan to remove the hybrid ports from the specified VLANs. Syntax port hybrid vlan vlan-list { tagged | untagged } undo port hybrid vlan vlan-list Default A hybrid port allows only packets from VLAN 1 to pass through untagged. Views Ethernet interface view, aggregate interface view, S-channel interface view Predefined user roles network-admin Parameters vlan-list: Specifies a list of existing VLANs in the format of vlan-list = { vlan-id1 [ to vlan-id2 ] }&, where vlan-id1 and vlan-id2 each are in the range of 1 to 4094, vlan-id2 cannot be smaller than vlan-id1, and & indicates that you can specify up to 10 vlan-id1 [ to vlan-id2 ] parameters. tagged: Configures the ports to send the packets of the specified VLANs without removing VLAN tags. untagged: Configures the ports to send the packets of the specified VLANs after removing VLAN tags. Usage guidelines A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the VLANs that the hybrid port allows are the VLANs that are specified by vlan-list in each execution. • The configuration made in Ethernet interface view applies only to the port. • The configuration made in aggregate interface view applies to the aggregate interface and its aggregation member ports. { If the system fails to apply the configuration to the aggregate interface, it stops applying the configuration to aggregation member ports. { If the system fails to apply the configuration to an aggregation member port, it skips the port and moves to the next member port. • The configuration made in S-channel interface view applies only to the interface. 158