HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 86
lacp period short, lacp system-priority
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Examples # Create aggregate interface Bridge-Aggregation 1 and enter its view. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] lacp period short Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (3 seconds), and make the peer end to send LACPDUs quickly. Use undo lacp period to restore the default setting. Syntax lacp period short undo lacp period Default The LACP timeout interval is the long timeout interval (90 seconds). Views Ethernet interface view Predefined user roles network-admin Usage guidelines Do not configure the short LACP timeout interval before performing an ISSU. Otherwise, traffic interruption will occur during the ISSU. Examples # Set the LACP timeout interval on Ten-GigabitEthernet 1/1/5 to the short timeout interval (3 seconds). system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] lacp period short lacp system-priority Use lacp system-priority to set the system LACP priority. Use undo lacp system-priority to restore the default setting. Syntax lacp system-priority system-priority undo lacp system-priority Default The system LACP priority is 32768. Views System view 79