HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 79

display link-aggregation load-sharing mode interface bridge-aggregation 10 Bridge-Aggregation10 Load-Sharing Mode: Layer 2 traffic: packet type-based sharing Layer 3 traffic: packet type-based sharing Table 15 Command output Field Link-Aggregation Load-Sharing Mode Bridge-Aggregation10 Load-Sharing Mode Layer 2 traffic: packet type-based sharing Layer 3 traffic: packet type-based sharing Description Global link-aggregation load sharing criteria. If the default global load sharing criteria are used, this field displays the load sharing criteria for Layer 2 and Layer 3 traffic. Otherwise, this field displays the global load sharing criteria configured by the user. Link-aggregation load sharing criteria of the aggregation group that corresponds to the aggregate interface Bridge-Aggregation 10. If the default group-specific load sharing criteria are used, this field displays the global load sharing criteria. Otherwise, this field displays the group-specific load sharing criteria configured by the user. Default link-aggregation load sharing criteria for Layer 2 traffic. In this sample output, the criterion is the packet type. Default link-aggregation load sharing criteria for Layer 3 traffic. In this sample output, the criterion is the packet type. Related command • link-aggregation global load-sharing mode • link-aggregation load-sharing mode display link-aggregation member-port Use display link-aggregation member-port to display detailed link aggregation information for the specified member ports. Syntax display link-aggregation member-port [ interface-list ] Views Any view Predefined user roles network-admin network-operator Parameters interface-list: Specifies a list of link aggregation member ports, in the format interface-type interface-number [ to interface-type interface-number ], where interface-type interface-number specifies an interface by its type and number. 72