HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 40
using fortygige, Related commands, Syntax, Default, Views, Predefined user roles, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] unicast-suppression kbps 10000 Related commands • broadcast-suppression • multicast-suppression using fortygige Use using fortygige to combine four 10-GE interfaces that are split from a 40-GE interface into a 40-GE interface. Use undo using fortygige to cancel the configuration. Syntax using fortygige undo using fortygige Default The 10-GE interfaces that are split from a 40-GE interface are used as single interfaces, and they will not be automatically combined. Views Split 10-GE interface view Predefined user roles network-admin Usage guidelines If you need higher bandwidth, you can combine four 10-GE interfaces that are split from a 40-GE interface into a 40-GE interface. To make this command take effect on the four split 10-GE interfaces, execute this command on only one of the split 10-GE interfaces. After the configuration, the system prompts you to reboot your device. You must reboot the device to see the combined 40-GE interface. Examples # Combine 10-GE interfaces Ten-GigabitEthernet 1/1/1:1 through Ten-GigabitEthernet 1/1/1:4 into a 40-GE interface. system-view [System] interface ten-gigabitethernet1/1/1:1 [System-Ten-GigabitEthernet1/1/1:1] using fortygige The interfaces Ten-GigabitEthernet1/1/1:1 through Ten-GigabitEthernet1/1/1:4 will be deleted. Continue? [Y/N]:y Reboot device to make the configuration take effect. Related commands using tengige 33