HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 78
display link-aggregation load-sharing mode
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table 14 Command output Field Actor System ID: 0x8000, 0000-fc00-6504 Description Local system ID, which comprises the system LACP priority (0x8000 in this sample output) and the system MAC address (0000-FC00-6504 in this sample output). Related commands lacp system-priority display link-aggregation load-sharing mode Use display link-aggregation load-sharing mode to display global or group-specific link-aggregation load sharing criteria. Syntax display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ] Views Any view Predefined user roles network-admin network-operator Parameters bridge-aggregation: Displays the load sharing criteria of the aggregation group that corresponds to the specified aggregate interface. interface-number: Specifies an existing aggregate interface number. Usage guidelines To display the global link-aggregation load sharing criteria, run the command without the interface keyword. To display all the group-specific load sharing criteria, run the command with the interface keyword, but do not specify a particular interface. To display the load sharing criteria of a particular aggregation group, perform the command with the aggregate interface specified. The bridge-aggregation keyword becomes available only after you create aggregate interfaces on the device. Examples # Display the global link-aggregation load sharing criteria. display link-aggregation load-sharing mode Link-Aggregation Load-Sharing Mode: Layer 2 traffic: packet type-based sharing Layer 3 traffic: packet type-based sharing # Display the link-aggregation load sharing criteria of the aggregation group that corresponds to aggregate interface Bridge-Aggregation 10. 71