HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 71
mac-address information mode, mac-address information queue-length
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Usage guidelines To prevent Syslog messages or SNMP notifications from being sent too frequently, set the MAC change sending interval to a larger value. Examples # Set the MAC change sending interval to 200 seconds. system-view [Sysname] mac-address information interval 200 mac-address information mode Use mac-address information mode to set the MAC Information mode (to use Syslog messages or SNMP notifications) to send MAC address changes. Use undo mac-address information mode to restore the default. Syntax mac-address information mode { syslog | trap } undo mac-address information mode Default SNMP notifications are used to send MAC address changes. Views System view Predefined user roles network-admin Parameters syslog: Specifies that the device sends Syslog messages to notify MAC address changes. trap: Specifies that the device sends SNMP notifications to notify MAC address changes. Examples # Configure the MAC Information mode as trap. system-view [Sysname] mac-address information mode trap mac-address information queue-length Use mac-address information queue-length to set the MAC Information queue length. Use undo mac-address information queue-length to restore the default. Syntax mac-address information queue-length value undo mac-address information queue-length Default The MAC Information queue length is 50. 64