HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 66
mac-address multiport (system view), Related commands, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] mac-address multiport 0001-0001-0101 vlan 2 [Sysname-Ten-GigabitEthernet1/0/1] quit [Sysname] interface ten-gigabitethernet 1/0/2 [Sysname-Ten-GigabitEthernet1/0/2] mac-address multiport 0001-0001-0101 vlan 2 Related commands • display mac-address multiport • mac-address multiport (system view) mac-address multiport (system view) Use mac-address multiport to add the specified interfaces to a multiport unicast MAC address entry. Use undo mac-address multiport to remove the specified interfaces from a multiport unicast MAC address entry. Use undo mac-address to remove a multiport unicast MAC address entry. Syntax mac-address multiport mac-address interface interface-list vlan vlan-id undo mac-address multiport mac-address interface interface-list vlan vlan-id undo mac-address [ multiport ] [ [ mac-address ] vlan vlan-id ] Default No multiport unicast MAC address entry is configured. Views System view Predefined user roles network-admin Parameters multiport: Specifies a multiport unicast MAC address entry. mac-address: Specifies a unicast MAC address in H-H-H format, excluding multicast and all-zero MAC addresses. When entering a MAC address, you can omit the leading zeros in each H section. For example, enter f-e2-1 for 000f-00e2-0001. interface interface-list: Specifies interfaces in the format of { { interface-type interface-number } [ to { interface-type interface-number } ] } &. The interface type can be the Ethernet interface or aggregate interface. & specifies that you can configure up to 4 interfaces or interface ranges. vlan vlan-id: Specifies an existing VLAN to which the interfaces belong. The value range for the vlan-id argument is 1 to 4094. Usage guidelines A multiport unicast MAC address entry is used to send frames with a specific destination MAC address out of multiple ports. When you execute this command for the first time, the command adds a MAC address entry. When you execute the command again with the same MAC address and VLAN but with different interfaces, this command adds the specified interfaces for this entry. 59