HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 119
stp bpdu-protection, stp bridge-diameter
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Examples # Set the MSTP revision level of the MST region to 5. system-view [Sysname] stp region-configuration [Sysname-mst-region] revision-level 5 Related commands • active region-configuration • check region-configuration • display stp region-configuration • instance • region-name • vlan-mapping modulo stp bpdu-protection Use stp bpdu-protection to enable the BPDU guard function. Use undo stp bpdu-protection to disable the BPDU guard function. Syntax stp bpdu-protection undo stp bpdu-protection Default The BPDU guard function is disabled. Views System view Predefined user roles network-admin Examples # Enable the BPDU guard function. system-view [Sysname] stp bpdu-protection stp bridge-diameter Use stp bridge-diameter to specify the network diameter, which is the maximum possible number of stations between any two terminal devices on the switched network. Use undo stp bridge-diameter to restore the default. Syntax stp bridge-diameter diameter undo stp bridge-diameter 112