HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 92
link-aggregation port-priority, Default, Views, Predefined user roles, Examples, Syntax, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Default An aggregation group operates in static aggregation mode. Views Aggregate interface view Predefined user roles network-admin Examples # Configure the aggregation group that corresponds to Bridge-Aggregation 1 to operate in dynamic aggregation mode. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] link-aggregation mode dynamic link-aggregation port-priority Use link-aggregation port-priority to set the port priority of an interface. Use undo link-aggregation port-priority to restore the default setting. Syntax link-aggregation port-priority port-priority undo link-aggregation port-priority Default The port priority of an interface is 32768. Views Ethernet interface view Predefined user roles network-admin Parameters port-priority: Specifies the port priority in the range of 0 to 65535. The smaller the value, the higher the port priority. Examples # Set the port priority of Ethernet interface Ten-GigabitEthernet 1/1/5 to 64. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] link-aggregation port-priority 64 Related commands lacp system-priority 85