HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 170
QinQ commands, display qinq
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
QinQ commands This document uses the following terms: • CVLAN-Customer network VLANs, also called "inner VLANs," refer to VLANs that a customer uses on the private network. • SVLAN-Service provider network VLANs, also called "outer VLANs," refer to VLANs that a service provider uses to transmit VLAN tagged traffic for customers. display qinq Use display qinq to display the QinQ-enabled interfaces. Syntax display qinq [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Displays whether QinQ is enabled on an interface specified by its type and number. If no interface is specified, this command displays all QinQ-enabled interfaces. Usage guidelines If QinQ is not enabled on any interface, this command does not provide any output. Examples # Enable QinQ on interface FortyGigE 1/1/1. Then verify whether QinQ is enabled on the interface. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] qinq enable [Sysname-FortyGigE1/1/1] display qinq interface fortygige 1/1/1 Interface FortyGigE1/1/1 # Enable QinQ on interfaces FortyGigE 1/1/1 and FortyGigE 1/1/3. Then display all QinQ-enabled interfaces. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] qinq enable [Sysname-FortyGigE1/1/1] quit [Sysname] interface fortygige 1/1/3 [Sysname-FortyGigE1/1/3] qinq enable [Sysname-FortyGigE1/1/3] display qinq 163