HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 131
stp point-to-point
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Syntax stp pathcost-standard { dot1d-1998 | dot1t | legacy } undo stp pathcost-standard Default The devices uses the legacy standard to calculate the default path costs for ports. Views System view Predefined user roles network-admin Parameters dot1d-1998: Configures the device to calculate the default path cost for ports based on IEEE 802.1d-1998. dot1t: Configures the device to calculate the default path cost for ports based on IEEE 802.1t. legacy: Configures the device to calculate the default path cost for ports based on a private standard. Usage guidelines If you change the standard that the device uses in calculating the default path costs, you restore the path costs to the default. Examples # Configure the device to calculate the default path cost for ports based on IEEE 802.1d-1998. system-view [Sysname] stp pathcost-standard dot1d-1998 Related commands • display stp • stp cost stp point-to-point Use stp point-to-point to configure the link type of the ports. Use undo stp point-to-point to restore the default. Syntax stp point-to-point { auto | force-false | force-true } undo stp point-to-point Default The default setting is auto, and the spanning tree device automatically detects whether a port connects to a point-to-point link. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin 124