HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 130
stp no-agreement-check, stp pathcost-standard
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
system-view [Sysname] stp mode stp Related commands • stp enable • stp global enable • stp global mcheck • stp mcheck stp no-agreement-check Use stp no-agreement-check to enable No Agreement Check on the ports. Use undo stp no-agreement-check to disable No Agreement Check on the ports. Syntax stp no-agreement-check undo stp no-agreement-check Default No Agreement Check is disabled. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Usage guidelines This command takes effect only after you enable it on the root port. When the setting is configured in Ethernet interface view, it takes effect on only that interface. When the setting is configured in aggregate interface view, it takes effect on only the aggregate interface. When the setting is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group. Examples # Enable No Agreement Check on FortyGigE 1/1/1. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] stp no-agreement-check stp pathcost-standard Use stp pathcost-standard to specify a standard for the device to use when calculating the default path costs for ports. Use undo stp pathcost-standard to restore the default. 123