HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 195
Table 40, Command output, Rx_Only, Disable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Transmit interval Hold multiplier Reinit delay Transmit delay Trap interval Fast start times : 30s : 4 : 2s : 2s : 5s : 3 LLDP status information of Port 1 [FortyGigE1/1/1]: Port status of LLDP : Enable Admin status : Tx_Rx Trap flag : No MED trap flag : No Polling interval : 0s Number of LLDP neighbors : 0 Number of MED neighbors : 0 Number of CDP neighbors : 0 Number of sent optional TLV : 23 Number of received unknown TLV : 0 Table 40 Command output Field Global status of LLDP LLDP neighbor information last changed time Transmit interval Hold multiplier Reinit delay Transmit delay Trap interval Fast start times Port 1 Port status of LLDP Admin status Trap Flag Polling interval Number of neighbors Number of MED neighbors Number of CDP neighbors Description Indicates whether LLDP is globally enabled. Time when the neighbor information was last updated. LLDPDU transmit interval. TTL multiplier. LLDP re-initialization delay. LLDPDU transmit delay. Trap transmit interval. Number of LLDPDUs sent each time fast LLDPDU transmission is triggered. LLDP status of port 1. Indicates whether LLDP is enabled on the port. LLDP mode of the port: • TxRx-The port can send and receive LLDPDUs. • Rx_Only-The port can only receive LLDPDUs. • Tx_Only-The port can only send LLDPDUs. • Disable-The port cannot send or receive LLDPDUs. Indicates whether trapping is enabled. LLDP polling interval, which is 0 when LLDP polling is disabled. Number of LLDP neighbors connecting to the port. Number of MED neighbors connecting to the port. Number of CDP neighbors connecting to the port. 188