HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 145
Predefined user roles, Parameters, Usage guidelines, Examples, Related commands
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Predefined user roles network-admin Parameters modulo: Sets the modulo value in the range of 1 to 64. Usage guidelines You cannot map a VLAN to different MSTIs. If you map a VLAN that has been mapped to an MSTI to a new MSTI, the old mapping is automatically removed. This command maps each VLAN to the MSTI whose ID is (VLAN ID - 1) % modulo + 1, where (VLAN ID - 1) % modulo is the modulo operation for (VLAN ID - 1). If the modulo value is 15, then VLAN 1 is mapped to MSTI 1, VLAN 2 to MSTI 2, ..., VLAN 15 to MSTI 15, VLAN 16 to MSTI 1, and so on. Examples # Map VLANs to MSTIs as per modulo 8. system-view [Sysname] stp region-configuration [Sysname-mst-region] vlan-mapping modulo 8 Related commands • active region-configuration • check region-configuration • display stp region-configuration • region-name • revision-level 138