HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 98
Port isolation commands, display port-isolate group, port-isolate enable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Port isolation commands display port-isolate group Use display port-isolate group to display port isolation group information. Syntax display port-isolate group [ group-number ] Views Any view Predefined user roles network-admin network-operator Parameters group-number: Specifies an isolation group by its number in the range of 1 to 8. Examples # Display all isolation groups. display port-isolate group Port isolation group information: Group ID: 2 Group members: Ten-GigabitEthernet1/1/5 Group ID: 5 Group members: Ten-GigabitEthernet1/1/6 Ten-GigabitEthernet1/1/7 Table 19 Command output Field Group ID Group members Description Isolation group number. Isolated ports in the isolation group. Related commands port-isolate enable port-isolate enable Use port-isolate enable to assign a port to an isolation group. Use undo port-isolate enable to remove a port from an isolation group. 91