HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 202
lldp fast-count, lldp global enable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
lldp fast-count Use lldp fast-count to set the number of LLDPDUs sent each time fast LLDPDU transmission is triggered. Use undo lldp fast-count to restore the default. Syntax lldp fast-count count undo lldp fast-count Default The number is 3. Views System view Predefined user roles network-admin Parameters count: Sets the number of LLDPDUs sent each time fast LLDPDU transmission is triggered. The value range is 1 to 10. Usage guidelines When fast LLDPDU transmission is enabled, the device shortens the LLDPDU transmit interval to 1 second and restores it to the normal value after sending a certain number of LLDPDUs in succession. That number can be changed by using this command. Examples # Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered. system-view [Sysname] lldp fast-count 4 lldp global enable Use lldp global enable to enable LLDP globally. Use undo lldp global enable to disable LLDP globally. Syntax lldp global enable undo lldp global enable Default If the switch starts up with empty configuration, LLDP is disabled globally (initial setting). If the switch starts up with the default configuration file, LLDP is enabled globally (factory default). For more information about empty configuration and the default configuration file, see Fundamentals Configuration Guide. Views System view 195