HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 20
Port VLAN ID., If the speed of an interface is automatically negotiated, its speed attribute
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Field Description Protocol: (s) - spoofing If the network layer protocol state of an interface is shown as UP (s), it means that its link is up at the network layer but the link is an on-demand link or not present at all. This attribute is typical of interface Null 0 and the loopback interfaces. Interface Interface name. Physical link state of the interface: • UP-The link is up. Link • DOWN-The link is physically down. • ADM-The link has been administratively shut down. To recover its physical state, use the undo shutdown command. • Stby-The interface is a standby interface. Protocol Protocol connection state of the interface, which can be UP, DOWN, or UP(s). UP(s) indicates that the link of the interface is an on-demand link or not present at all. Description Interface description configured by using the description command. If the description keyword is not specified in the display interface brief command, the Description field displays at most 27 characters. If the description keyword is specified in the display interface brief command, the field displays the full interface description. The brief information of interface(s) under bridge mode: Brief information about Layer 2 interfaces. Speed or Duplex: (a)/A - auto; H half; F - full If the speed of an interface is automatically negotiated, its speed attribute includes the autonegotiation flag, letter a in parentheses. If the duplex mode of an interface is automatically negotiated, its duplex mode attribute includes the following options: • (a)/A-Autonegotiation. • H-Half negotiation. • F-Full negotiation. Type: A - access; T - trunk; H - hybrid Link type options for Ethernet interfaces. Speed Interface rate, in bps. Duplex Duplex mode of the interface: • A-Autonegotiation. • F-Full duplex. • F(a)-Autonegotiated full duplex. • H-Half duplex • H(a)-Autonegotiated half duplex. Type Link type of the interface: • A-Access. • H-Hybrid. • T-Trunk. PVID Port VLAN ID. 13