HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 121

Parameters auto: Configures the ports to recognize the MSTP BPDU format automatically and determine the format of MSTP BPDUs to send. dot1s: Configures the ports to receive and send only standard-format (802.1s-compliant) MSTP BPDUs. legacy: Configures the ports to receive and send only compatible-format MSTP BPDUs. Usage guidelines When the setting is configured in Ethernet interface view, it takes effect on only that interface. When the setting is configured in aggregate interface view, it takes effect on only the aggregate interface. When the setting is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group. Examples # Configure FortyGigE 1/1/1 to send only standard-format (802.1s) MSTP packets. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] stp compliance dot1s stp config-digest-snooping Use stp config-digest-snooping to enable digest snooping. Use undo stp config-digest-snooping to disable digest snooping. Syntax stp config-digest-snooping undo stp config-digest-snooping Default The feature is disabled. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Usage guidelines Enable this feature both globally and on ports connected to other vendors' devices. To minimize impact, enable the feature on all associated ports before you enable it globally. When the setting is configured in Ethernet interface view, it takes effect on only that interface. When the setting is configured in aggregate interface view, it takes effect on only the aggregate interface. When the setting is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group. Examples # Enable digest snooping on FortyGigE 1/1/1 and then globally. 114