HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 203
lldp hold-multiplier, Predefined user roles, Usage guidelines, Examples, Related commands, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Predefined user roles network-admin Usage guidelines LLDP takes effect only when LLDP is enabled both globally and on the port. Examples # Disable LLDP globally. system-view [Sysname] undo lldp global enable Related commands lldp enable lldp hold-multiplier Use lldp hold-multiplier to set the TTL multiplier. Use undo lldp hold-multiplier to restore the default. Syntax lldp hold-multiplier value undo lldp hold-multiplier Default The TTL multiplier is 4. Views System view Predefined user roles network-admin Parameters value: Sets the TTL multiplier in the range of 2 to 10. Usage guidelines The TTL TLV carried in an LLDPDU determines how long the device information carried in the LLDPDU can be saved on a recipient device. By setting the TTL multiplier, you can configure the TTL of locally sent LLDPDUs, which determines how long information about the local device can be saved on a neighboring device. The TTL is expressed by using the following formula: TTL = Min (65535, (TTL multiplier × LLDPDU transmit interval)) As the expression shows, the TTL can be up to 65535 seconds. Examples # Set the TTL multiplier to 6. system-view [Sysname] lldp hold-multiplier 6 196