HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 82

Usage guidelines Information about the remote system for a static link aggregation group is displayed as none or not displayed at all, because static link aggregation groups are unaware of information about the peer groups. Examples # Display the summary information for all aggregation groups. display link-aggregation summary Aggregate Interface Type: BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation Aggregation Mode: S -- Static, D -- Dynamic Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Actor System ID: 0x8000, 000f-e267-6c6a AGG AGG Partner ID Selected Unselected Share Interface Mode Ports Ports Type BAGG1 S none 1 0 Shar BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar Table 17 Command output Field Aggregate Interface Type Aggregation Mode Loadsharing Type Actor System ID AGG Interface AGG Mode Partner ID Selected Ports Unselected Ports Share Type Description Aggregate interface type: • BAGG-Layer 2 aggregate interface. • RAGG-Layer 3 aggregate interface. Aggregation group type: • S-Static link aggregation. • D-Dynamic aggregation. Load sharing type: • Shar-Load sharing. • NonS-Non-load sharing. Local system ID, which comprises the system LACP priority and the system MAC address. Type and number of the aggregate interface. Aggregation group type. System ID of the partner, which comprises the system LACP priority and the system MAC address. Total number of Selected ports. Total number of Unselected ports. Load sharing type. display link-aggregation verbose Use display link-aggregation verbose to display detailed information about the aggregation groups that correspond to the aggregate interfaces. 75