HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 118
revision-level, Syntax, Views, Predefined user roles, Parameters, Examples, Related commands, Default
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Syntax reset stp [ interface interface-list ] Views User view Predefined user roles network-admin Parameters interface interface-list: Clears the MSTP statistics information of the ports that are specified in the format of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&, where & indicates that you can specify up to 10 ports or port ranges. If you don't specify this option, this command clears the spanning tree-related statistics information on all ports. Examples # Clear the spanning tree-related statistics on ports FortyGigE 1/1/1 through FortyGigE 1/1/3. reset stp interface fortygige 1/1/1 to fortygige 1/1/3 Related commands display stp revision-level Use revision-level to configure the MSTP revision level. Use undo revision-level to restore the default MSTP revision level. Syntax revision-level level undo revision-level Default The MSTP revision level is 0. Views MST region view Predefined user roles network-admin Parameters level: Specifies an MSTP revision level in the range of 0 to 65535. Usage guidelines The MSTP revision level, the MST region name, and the VLAN-to-instance mapping table of a device determine the device's MST region. When the MST region name and VLAN-to-instance mapping table are both the same for two MST regions, they can still be differentiated by their MSTP revision levels. After configuring this command, run the active region-configuration command to activate the configured MST region level. 111