HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 2 - LAN Switching Command Refer - Page 26

system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] flow-interval 100 interface Use interface to enter interface view. Syntax interface interface-type interface-number Views System view Predefined user roles network-admin Parameters interface-type: Specifies an interface type. interface-number: Specifies an interface number. Examples # Enter Ten-GigabitEthernet 1/1/5 interface view. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] jumboframe enable Use jumboframe enable to allow jumbo frames within the specified length to pass through. Use undo jumboframe enable to prevent jumbo frames from passing through. Syntax jumboframe enable [ value ] undo jumboframe enable Default The device allows jumbo frames within 10000 bytes to pass through. Views Ethernet interface view Predefined user roles network-admin Parameters value: Sets the maximum length of Ethernet frames that are allowed to pass through. The value range for this argument is 1536 to 10000 bytes. Usage guidelines If you set the value argument multiple times, the most recent configuration takes effect. 19